Factory Directly Sell Automatic Litho Laminator Machine
Parameters:
| Model | ZGFM1500 | ZGFM1700 |
| Max size | 1500*1500mm | 1650*1650mm |
| Min size | 380*360mm | 380*360mm |
| Paper | 150-800g | 150-800g |
| Bottom paper | ≤10mm ABCDEF corrugated board | ≤10mm ABCDEF corrugated board |
| Max speed | 12000pcs/h | 12000pcs/h |
| Power | 25kw | 27kw |
| Stick accuracy | ±1.5mm | ±1.5mm |
1. Product description
1.1 Function:
The paper can be laminated with paperboard to increase the strength
and thickness of the material or special effects. After the
die-cutting, it can be used for packaging boxes, billboards and
other purposes.
1.2 Structure:
A. Upper Paper Feeder: It can send stacks of 150-800gsm paper from
above.
B. Bottom feed: It can send 0.5~1Omm paperboard from below.
C. Gluing mechanism: The glued water can be applied to the fed
paper.
D. Regulatory organization - Fits the two papers according to the
set tolerances.
E. Pressurizing Conveyor... Presses the attached paper and conveys
it to the delivery section.
1.3 Principles:
The top paper is sent out by the upper paper feeder and sent to the
start detector of the positioning mechanism for detection. Then the
bottom paper is sent out; after the bottom paper is coated with
glue on the glue wheel, the top paper and the bottom paper are
respectively conveyed to the paper Synchronous detectors on both
sides, after the detection, the controller calculates the error
value of the paper and the bottom paper, and the servo compensation
device on both sides of the paper compensates the paper to a
predetermined position for splicing, and then pressurizes the
conveying. The machine presses the paper and conveys it to the
delivery machine to collect the finished product.
1.4 applicable materials:
Paste paper --- 150 ~ 800g/m thin paper, cardboard.
Bottom paper---0.5~10m/m paperboard, single-sided cardboard,
multi-layer corrugated paper, pearl board, honeycomb board,
styrofoam board.
Glue - resin, etc., PH value between 6 ~ 8, can be applied to the
glue.
Structural features:
◆ Adopting the world's leading transmission control system, only
need to input paper size system auto-tuning.
◆ Computerized high-speed fitting, up to 12,000 pieces per hour.
◆ Chuanliu-type air supply head, with four sets of forward nozzles
and four sets of suction nozzles.
◆ Feed Block adopts low stack cardboard, which can fit the paper to
the pallet, and can install track-assisted pre-stacker
◆ Use multiple sets of electric eyes to know the advance position
of the bottom line, and make the servo motor on both sides of the
face paper to independently rotate to compensate the upper and
lower paper alignment, which is accurate and smooth.
◆ Full-function electronic control system, using human-machine
interface and PLC program model display, can automatically detect
operating conditions and work records.
◆ Automatic glue replenishment system can automatically compensate
for lost glue and cooperate with glue recycling.
1.BOTTOM SHEET FEEDING
Use imported Servo motor electric controlling system, with Japan
NITTA suction belt to make suction power inverter, and belt cleaned
by water roller; Patented technology to ensure corrugate and
cardboard goes out smoothly and simple operation.
2.TOP SHEET FEEDING MECHANISM
3.Touch SCREEN
